Product Information
- SKU 229EWGN-A1
Description
- Open ended waveguide Probe 229EWGN-A1, operating from 3.3 to 4.9GHz with a nominal 5dB gain and low VSWR 2.0:1 with right angle coaxial N Type Female output connector. The model 229EWGN-A1 is equipped with absorber for better gain flatness and radiation pattern. A small degree chamfer is utilized to give a knife-edge aperture of this model to minimize the end diffraction. This open ended waveguide probe has linear polarization and designed specifically for planar and cylindrical near field measurements and calibration.
Technical Specification
Electrical Specification
- Frequency, Min (GHz) 3.3
- Frequency, Max (GHz) 4.9
- Waveguide Type Rectangular
- Waveguide Size EIA WR WR229
- Gain, Typ (dBi) 5
- Polarization Linear
- 3dB Beamwidth, E-Plane, Typ (Deg.) 91
- 3dB Beamwidth, H-Plane, Typ (Deg.) 63
- Cross Pol. Isolation, Typ (dB) 30
- VSWR, Typ 2.0:1
- Impedance, (Ohm) 50
- Power Handling, CW, (W) 150
- Power Handling, Peak, (W) 3000
Interface
- Output Type Coaxial
- Connector N Type
- Connector Gender Female
Mechanical Specification
- Body Material Al
- Finish Chemical Conversion Coating, Gray Paint
- Size, W (mm) 480
- Size, H (mm) 480
- Size, L (mm) 373.4
Additional Information
- Application General Purpose Indoor & Outdoor, Fixed
-
Solution for
Planar Near-Field Measurement
Cylinderical Near-Field Measurement
Spherical Near-Field Measurement
Outline Drawing
N-Female Output, Equipped with Absorber (Option, P/N: 229EWGN-A1)
N-Female Output with Round Mounting Bracket & Equipped with Absorber (Option, P/N: EWG- MB10 & 229EWGN-A1)
Typical Test Results
VSWR
