Product Information
- SKU 10EWG1.0
Description
-
Open ended waveguide Probe 10EWG1.0, operating from 75 to 110GHz with a nominal 6dB gain and low VSWR 2.0:1 with right angle coaxial 1.0mm Female output connector. The model 10EWG1.0 has uniform gain through its frequency span, providing efficient performance characteristics and directionality. A small degree chamfer is utilized to give a knife-edge aperture of this model to minimize the end diffraction. This open ended waveguide probe has linear polarization and designed specifically for planar and cylindrical near field measurements and calibration.
Technical Specification
Electrical Specification
- Frequency, Min (GHz) 75
- Frequency, Max (GHz) 110
- Waveguide Type Rectangular
- Waveguide Size EIA WR WR10
- Gain, Typ (dBi) 6
- Polarization Linear
- 3dB Beamwidth, E-Plane, Typ (Deg.) 90
- 3dB Beamwidth, H-Plane, Typ (Deg.) 60
- Cross Pol. Isolation, Typ (dB) 35
- VSWR, Typ 2.0:1
- Impedance, (Ohm) 50
- Power Handling, CW, (W) 3
- Power Handling, Peak, (W) 5
Interface
- Output Type Coaxial
- Connector 1.0mm
- Connector Gender Female
Mechanical Specification
- Body Material Cu
- Finish Gold Plated and Chemical Conversion Coating, Gray Paint
- Size, W (mm) 101.6
- Size, H (mm) 101.6
- Size, L (mm) 185.2
- Weight, (kg) 0.2
Additional Information
- Application General Purpose Indoor & Outdoor, Fixed
-
Solution for
Planar Near-Field Measurement
Cylinderical Near-Field Measurement
Spherical Near-Field Measurement
Outline Drawing
1.0mm-Female Output (P/N: 10EWG1.0)
1.0mm-Female Output with Round Mounting Bracket (Option, P/N: EWG-MB40)
1.0mm-Female Output with L Type Mounting Bracket (Option, P/N: EWG-L30/FRP)
Typical Test Results
Gain
Antenna Factor
Cross Polarization Isolation
VSWR
Pattern
