Description
Open ended waveguide Probe 10EWGE1.0-A1, operating from 75 to 110GHz with a nominal 6dB gain and low VSWR 2.0:1 with endlaunch coaxial 1.0mm Female output connector. The model 10EWGE1.0-A1 is equipped with absorber for better gain flatness and radiation pattern. A small degree chamfer is utilized to give a knife-edge aperture of this model to minimize the end diffraction. This open ended waveguide probe has linear polarization and is designed specifically for planar and cylindrical near field measurements and calibration.
Technical Specification
Model | 10EWGE1.0-A1 |
---|---|
Frequency, Min (GHz) | 75 |
Frequency, Max (GHz) | 110 |
Waveguide Type | Rectangular |
Waveguide Size EIA WR | WR10 |
Gain, Typ (dBi) | 6 |
Polarization | Linear |
3dB Beamwidth, E-Plane, Typ (Deg.) | 90 |
3dB Beamwidth, H-Plane, Typ (Deg.) | 60 |
Cross Pol. Isolation, Typ (dB) | 35 |
VSWR, Typ | 2.0:1 |
Impedance, (Ohm) | 50 |
Output Type | Coaxial |
Connector | 1.0mm |
Connector Gender | Female |
Power Handling, CW, (W) | 3 |
Power Handling, Peak, (W) | 5 |
Body Material | Cu |
Finish | Gold Plated and Chemical Conversion Coating, Gray Paint |
Size, W (mm) | 399.6 |
Size, H (mm) | 399.6 |
Size, L (mm) | 179.4 |
Weight, (kg) | 2.43 |
Application | General Purpose Indoor & Outdoor, Fixed |
Solution for | Planar Near-Field Measurement , Cylinderical Near-Field Measurement, Spherical Near-Field Measurement |