Description
Dual polarization waveguide probes 112EWGS-T02-A1, operating from 7.05 to 10GHz with a nominal 8dB gain and low VSWR 1.60:1 with right angle Coaxial SMA Female connector on each output. The model 112EWGS-T02-A1 is equipped with absorber for better gain flatness and radiation pattern. a small degree chamfer is utilized to give a knife-edge aperture of this model to minimize The end diffraction. this Open Ended Waveguide Probe has dual linear polarization and is designed specifically for planar and cylindrical near field measurements and calibration.
Technical Specification
Model | 112EWGS-T02-A1 |
---|---|
Frequency, Min (GHz) | 7.05 |
Frequency, Max (GHz) | 10 |
Waveguide Type | Rectangular |
Waveguide Size EIA WR | WR112 |
Gain, Typ (dBi) | 8 |
Polarization | Dual Linear |
3dB Beamwidth, E-Plane, Typ (Deg.) | 60 |
3dB Beamwidth, H-Plane, Typ (Deg.) | 65 |
Cross Pol. Isolation, Typ (dB) | 30 |
Port to Port Isolation, Min (dB) | 30 |
Port to Port Isolation, Typ (dB) | 40 |
VSWR, Typ | 1.60:1 |
Impedance, (Ohm) | 50 |
Output Type | Coaxial |
Connector | SMA |
Connector Gender | Female |
Power Handling, CW, (W) | 50 |
Power Handling, Peak, (W) | 3000 |
Body Material | Al |
Finish | Chemical Conversion Coating, Gray Paint |
Size, W (mm) | 400 |
Size, H (mm) | 400 |
Application | General Purpose Indoor & Outdoor, Fixed |
Solution for | Planar Near-Field Measurement , Cylinderical Near-Field Measurement, Spherical Near-Field Measurement |