OpenCube CSS Menu


Contact us:
Tel: +86-28-8519-2786
Fax: +86-28-8519-3068
Any RFQ, pls. email to: sales@ainfoinc.com

   
logo Pay With:
ISO9001:2008
Worldwide Representative Recruiting.....

20 years hard work, AINFO get good reputation by providing competitive product & service. Now, is the time to build stronger relationship w/ representative to better serve our customer worldwide.

In Antenna, RF, Microwave industry? Pls. review
www.ainfoinc.com. Capable in promoting AINFO's product, download the NDA & International Rep. Survey, fill in and e-mail to sales@ainfoinc.com.

 

         
Waveguide Components
WG_WG to Coaxial Adapter
Right Angle
Endlaunch
Double Ridge
Double Ridge Endlaunch
Double Ridge High Power
 
WG_Ortho-Mode Transducer(OMT)New
 
WG_Tee
 
WG_Rotary Joint
 
WG_Transition
Rectangular to Rectangular
Rectangular to Rectangular Transition Specials
Double Ridge to Rectangular
Double Ridge to Double Ridge
 
WG_Load
Precision & Low Power
Sliding Load
Low-Medium Power
Medium Power
High Power
Double Ridge Low Power
Double Ridge Medium Power
Double Ridge High Power
 
WG_Electric Double Ridge Switch
 
WG_Coupler
WG Cross
WG High Directional
WG Loop
DR WG High Directional
 
WG_Bend/Straight/Twist
Rectangular Straight WG
Radius Bend WG
Miter Bend WG
Rectangular Twist WG
Double Ridge Straight WG
Double Ridge Bend WG
Double Ridge Twist WG
 
WG_Short Plates
Waveguide Short Plates
Waveguide Offset Short
DR WG Short Plates
DR WG Offset Short
 
WG_Spacer (Shim)
Waveguide Spacer
Double Ridge WG Spacer
 
WG_VNA Calibration Kits
 
WG_Flange
Waveguide Flange
Double Ridge WG Flange
 
WG_Gasket
 
WG_Detector
 
WG_Fixed Attenuator
General Purpose
Precision - Low Power
Precision - Low-Medium Power
Precision - Medium Power
Precision - High Power
 
WG_Isolator
 
WG_Circulator
 
WG_Filter
Band Pass
Low Pass
High Pass
 
WG_Regular WG Info.
 
WG_Flange Information
Standard Flange Information
Precision Flange Information
DR Flange Information
 

   
Click below link to swith to our other product categories
 

Double Ridge Waveguide Offset Short


1. Double Ridge 1/8 and 3/8 Wavelength Offset Short (Table 1)

2. Double Ridge 1/4 Wavelength Offset Short (Table 2)

1. Double Ridge 1/8 and 3/8 Wavelength Offset Short

Double ridge offset shorts with 1/8 and 3/8 wavelength offsets are considered one of the more accurate means of obtaining a 180° phase difference in waveguide. Using these single-piece devices will reduce the number of flange interfaces during calibration. This helps to maintain an essentially constant magnitude of current flow across the calibration plane.

The chart below lists the offset shorts available from A-INFO. Those in rectangular guide are nominally 1/8 and 3/8 wavelength offset at a frequency near the waveguide band center. These will not be the exact band center as the frequency is chosen to equalize the phase differences at the band edges.

These are also available with a custom shorting distance as a special order. Please send us your inquiry and discuss your needs.

The data is for reference only.

EIA WRD

Freq. Range
(GHz)
1/8 Wavelength
Offset Short
3/8 Wavelength
Offset Short
Flange
Material
P/N
P/N

WRD84

0.84-2.0

84DRWOFS18

84DRWOFS38

FPWRD84D24

Al/Cu

WRD200

2.0-4.8

200DRWOFS18
In Stock!

200DRWOFS38
In Stock!

FPWRD200D24

Al/Cu

WRD250

2.6-7.8

250DRWOFS18
In Stock!

250DRWOFS38
In Stock!

FPWRD250D30

Al/Cu

WRD350

3.5-8.2

350DRWOFS18
In Stock!

350DRWOFS38
In Stock!

FPWRD350D24

Al/Cu

WRD475

4.75-11.0

475DRWOFS18_Cu

475DRWOFS38_Cu

FPWRD475D24

Cu

WRD580

5.8-16.0

580DRWOFS18_Cu

580DRWOFS38_Cu

FPWRD580D28

Cu

WRD650

6.5-18.0

650DRWOFS18_Cu
In Stock!

650DRWOFS38_Cu
In Stock!

FPWRD650D28

Cu

WRD750

7.5-18.0

750DRWOFS18_Cu
In Stock!

750DRWOFS38_Cu
In Stock!

FPWRD750D24

Cu

WRD110

11.0-26.5

110DRWOFS18_Cu

110DRWOFS38_Cu

FPWRD110C24

Cu

WRD180

18.0-40.0

180DRWOFS18_Cu

180DRWOFS38_Cu

FPWRD180C24

Cu

 

 

2. Double Ridge 1/4 Wavelength Offset Short

The chart below lists the 1/4 offset shorts available from A-INFO. Those in rectangular guide are nominally 1/4 wavelength offset at a frequency near the waveguide band center. These will not be the exact band center as the frequency is chosen to equalize the phase differences at the band edges.

These are also available with a custom shorting distance as a special order. Please send us your inquiry and discuss your needs.

The data is for reference only.

EIA WRD

Freq. Range
(GHz)

1/4 Wavelength Offset Short

Flange

Material

P/N

WRD84

0.84-2.0

84DRWOFS14

FPWRD84D24

Al/Cu

WRD200

2.0-4.8

200DRWOFS14

FPWRD200D24

Al/Cu

WRD250

2.6-7.8

250DRWOFS14

FPWRD250D30

Al/Cu

WRD350

3.5-8.2

350DRWOFS14

FPWRD350D24

Al/Cu

WRD475

4.75-11.0

475DRWOFS14_Cu

FPWRD475D24

Cu

WRD580

5.8-16.0

580DRWOFS14_Cu

FPWRD580D28

Cu

WRD650

6.5-18.0

650DRWOFS14_Cu

FPWRD650D28

Cu

WRD750

7.5-18.0

750DRWOFS14_Cu

FPWRD750D24

Cu

WRD110

11.0-26.5

110DRWOFS14_Cu

FPWRD110C24

Cu

WRD180

18.0-40.0

180DRWOFS14_Cu

FPWRD180C24

Cu

 

Pls refer to the Double Ridge Flange Information section for flange type

 

 

 

 

 

 

 

 
 
Copyright@ 2011 Chengdu AINFO Inc. All rights reserved.
Last updated 2016-09-01